How to Setup your SEW02 Care Label Thermal Transfer Printing System
Below we have shown some videos with some explainations of how to install/setup the printer. When you first unbox the printer, you should have the following items in the box
ZD220 Thermal Transfer Printer, UK Power Cables, USB Cable and a spare 1/2" Core (to rewind the ribbons onto).
The driver & Software can be downloaded when purchasing the SEW02 online. When installing the Printer Driver, you are looking for the ZDesigner ZD220-203dpi ZPL option.
Please note, the Satin materials and printer ribbons are then normally sent in a seperate package.
At the Rear of the printer there are 2 slots for the Power Cable and the USB Cable. Please view the video.
Installing the Media, placing the Roll of Satin material and printer ribbons into the correct postions in the printer
Printing on to the Satin material using the HL35 Black Printer Ribbon
Please view the image below for what you should find inside the box.
How the printer looks when the Ribbons and Satin is installed correctly
The final printed satin label example
Setting up the Printer Driver. This can be found by going into the computers control panel, selecting Devices and Printer and then right clicking on the correct driver (ZDesigner ZD220-203dpi ZPL) and selecting Printing Preferences.